Not just your average pool chemical package, along with the basic pool treatment it also has these features:
- Rapid-dissolving chlorine granules to destroy bacteria
- Stabiliser to protect chlorine loss due to sunlight
- Algaecide to deter green water (algal growth)
- Clarifier to ensure that your pool water remains crystal clear
DIRECTIONS FOR USE
Maintain a Free Chlorine Residual of between 2 to 3ppm (parts per million) in your pool water at all times.
1. To increase the Free Chlorine Residual by 1ppm in 50 cubic meters (11,000 gallons) of pool water, add 100 grams of Multi-Pool Granules. (e.g. to increase Free Chlorine Residual from 1ppm to 3ppm in a 70m3 (15,000gal) pool add 280 grams of Multi-Pool Granules.
2. Pre-dissolve granules in a clean plastic bucket filled with pool water. Never add more than 100gm per 10ltr bucket. Add Multi-Pool Granules to water, not visa-versa.
3. Remove any water treatment products from skimmer before slowly pouring solution into skimmer.
4. Ensure that pool circulation pump is running when adding this product. Slowly pour the dissolved solution into the skimmer basket. Operate circulation pump for at least 30 minutes after adding Multi-Pool Granules.
5. Re-test water after 30 minutes to ensure that the optimum chlorine residual has been achieved (2-3ppm).
6. Never add this product when your pool is being used; do not allow pool to be used for 30 minutes after Multi-Pool Granules have been added.
7. Multi-Pool Granules are ideal for daily treatment. Occasionally your pool will need to be shock chlorinated with Relax Shock Granules.
